• Continuous wave CO2 energy resulting in maximum lateral thermal diffusion and collagen stimulation with minimal patient discomfort and downtime
• Two hand pieces that can be easily interchanged intraoperatively and deliver 180 um and 300 um MicroSpots with complete treatment density and pulse width adjustments
• Computerized pattern generation for precise reproducibility
• Non-sequential delivery system for maximum patient comfort and safety

The MiXto SX® gives the practicing aesthetic clinician the ability to control the amount of heat collateralized to the dermis, by allowing for precise regulation of the depth of penetration, energy delivered per pulse and pulse width. The high-speed scanner, driven by a patent pending algorithm, divides the scan area into four quadrants or "fractions" and skips the beam from quadrant to quadrant so that each lase site  is separated by the longest possible interval. The process is repeated until the entire scan area is treated.  Distributing the laser energy in this manner allows maximum time for thermal cooling of the tissue and means less pain for the patient, and faster, more predictable recovery.

With this "quadrant" fractional technology and a more tightly focused beam, the MiXto SX® laser delivers uniform tissue ablation well into the dermis causing immediate contraction and tissue tightening. A secondary effect is the production of new collagen over the next 6-12 weeks, which improves skin elasticity and restores a more youthful, radiant appearance to the skin.

The MiXto SX® System can be used in Micro Fractional Mode, Traditional Resurfacing Mode, or Surgical (incisional) Mode, resulting in a flexibility that delivers unequalled results.

Mixto SX® Results:

Immediate Tightening
Immediate contraction of collagen fibers reducing wrinkles and lax skin. Skin laxity is noticeably improved.

Textural Improvement
Removes pigmentation problems, reduces pore size, wrinkles, acne scars, and other textural irregularities.

Effective on Skin Lesions
Effective on dyschromia (discoloration from sun damage and aging) and on actinic keratoses (pre-cancerous cells that may be invisible to the naked eye).

Short Down Time
The remarkable results the Mixto SX® Fractional technique makes the healing process much quicker and enables patients to get back to their normal life style sooner.

Other Benefits:

• Flexibility of adjustable settings for versatility of use
• No consumables and their associated "cost of ownership"
• Only topical anesthetic required for patient comfort
• Basic and advanced training included
• Two year transferable warranty
• Ability to treat different skin types I - VI
• 30 minute procedure, Simple pre and post care
• Lightweight & Portable (85 lbs)
• Turn key marketing assistance
• Customer Loyalty Rewards Program

Physician FAQ

Video

See the MiXto SX® Laser at Work!

Clinical Papers & Articles

An Innovative Device for Fractional CO2 Laser Resurfacing: A Preliminary Clinical Study.  Daniel A. Cassuto, MD; Neil S. Sadick, MD; Luca Scrimali, MD; Paolo Sirago, MD.  The American Journal of Cosmetic Surgery. Vol. 25, No. 2, 2008.

1. What is MiXto SX® Micro Fractional C02?  

C02 is a carbon dioxide laser that has been used for more than 25 years in the Aesthetic industry for treatment of conditions such as fine and deep wrinkles, scars of various origin, uneven pigmentation and dilated pores. When the C02 beam of light comes in contact with the epidermis it heats and vaporizes the skin tissue, instantly removing the superficial layers of the skin, scars and wrinkles while smoothing out the surface of the skin. The skin remodeling occurs with new skin and collagen growth. MiXto SX® stands for the Mixture between C02 energy and fractional resurfacing, the SX stand for surgical because the Laser can also be used to make a very clean incision without bleeding.

2. How does it work?

The MiXto SX® gives the Physician more control to regulate the depth of penetration and the amount of heat delivered by the beam. The high speed scanner, driven by a patented pending algorithm divides the treatment area into four quadrants or “fractions” and skips the beam from quadrant to quadrant so that each strike is separated by the longest possible interval. This process is repeated until the entire area is treated. Dividing energy this way allows maximum time for thermal cooling of the tissue, less pain for the patient and faster recovery! Compared to traditional resurfacing of the past this is a big step in technology for the patient and the physician!

3. How is this different than other laser treatments?

The MiXto delivers more results in a 30-minute treatment than competitors can accomplish in three treatments for less discomfort, downtime and cost.

4. Does it hurt? 

For most patients we apply topical anesthetic and oral tylenol then they can drive themselves home. The discomfort is similar to bad sunburn.

5. What are the risks?

Erythema (redness of skin); the laser-treated areas have a distinctive redness representing increased blood flow due to the growth of the superficial tissue and collagen. It will gradually fade during the first few days. Inflammation (swelling); Treatment with the MiXto System presents a minimal amount of swelling that can last up to 24 hours. Hyperpigmentation (tanning); This is presented after the third day of the procedure but then begins to shed and reveal younger healthy looking skin. A personal interview and clinical examination will be conducted to obtain relevant facts about your medical and dermatologic history, and any medications you are currently taking or have taken in the past. If you are prone to cold sores, you need to ask your doctor for an antivirius prescription before the treatment. Fractional Treatment with the MiXto SX® has been proven safe for the face, neck, chest and hands.

6. How long is recovery?  

Most patients are ready to go back to work the next day, but it depends on the patient and their lifestyle. Typical downtime is 4-5 days.

7. What is the recovery like?  

The patient is red and can be swollen the next day. On the second, third and fourth day the patient is peeling and can experience a little itchiness typical to a sunburn.

8. When do you see the results?  

Right away!  When we are doing the procedure you can immediately see the skin contract and shrink. The patient will really see the benefits by the time the skin is completely peeled and will continue to see results for up to six months with new collagen regeneration that "plumps" up the skin.

9. Who is the best candidate for this procedure?

There are three separate groups the MiXto applies to, the younger patient with severe acne scars, the middle-aged patient with wrinkles and age spots and the older patient with wrinkles, age spots and pre-cancerous lesions.

10. How many treatments are needed?

In most cases only one, but for deeper wrinkles and acne scars two or more treatments.

11. Is it just for the face or can it be used on other areas of the body?

It is most commonly used on the face but can be used on neck, chest, arms and hands.

12. Is the treatment expensive?

The new technology has actually brought the price down  without the compromising the results.

13. What is the cost?

MiXto treatments are generally under $3000.00 for a one-time full-face treatment.

Top of Page

Weighing the Costs Vs. Benefits of New Technology for Laser Skin Resurfacing

A new fractional laser technology provides "gold standard" clinical results, expedites cosmetic and general practice treatment while boosting profitability...by  Dr. Mark Kofford, M.D., Ph.D. and Dr. Jeannine Wills-Kofford, owner-operators of the Kofford Clinic and Riviera Laser Studios in Dana Point, California.
Read more...

With more than 30 years in the active practice of cosmetic surgery, I have certainly seen technology come and go – some good and some bad.  The fractional CO2 belongs in the very good new technology category for several reasons.
Read more...